| 环氧砂浆地坪基面处理 |
| 添加时间：2018/6/13 17:45:43 浏览次数： |
| 环氧砂浆地坪基面处理 Treatment of epoxy mortar floor base surface 1，为使地坪涂料的施工达到良好效果，对于尚未找平的地面，施工前应首先施工水泥找平以进行找平处理。土建方找平时，在水泥初凝时，用专业地面机械对地面进行磨平处理。经过基层处理再涂装的环氧涂地坪的表面会更平整、光亮，使用寿命也会提高。 1, in order to achieve good results in the construction of floor coatings, for the ground that has not yet been leveled, the cement leveling should be started before construction. When constructing the cement, the civil engineers usually use the professional ground machinery to grind the ground. The surface of the epoxy floor coated by the basic treatment will be more smooth and bright, and the service life will also be improved. 2，待水泥层干燥后（大约28D），用打磨机对地面进行整体打磨处理，使其表面平整，水泥毛细孔全部敞开。 2, after the cement layer is dry (about 28D), the ground is grinded with a grinding machine to make the surface smooth and the cement pores fully open. 3，对于有油污（食用油、机油）的基层，先用表面处理机喷洒于用水冲湿的地表面，反复擦洗，直到无油污为止。 3, for oil pollution (oil, oil) of the base, the first surface treatment machine sprayed on the surface of water washed wet, repeatedly scrubbed, until no oil pollution. 4，对于碱性太大（PH>8）的基层，先用稀盐酸或者稀醋酸积极性中和处理，然后用清水冲洗。 4, for alkaline base (PH>8), first use dilute hydrochloric acid or dilute acetic acid to neutralize actively, then rinse with water. 5，对于潮湿的地面，通过吸水、擦干，太阳、灯照，热风机吹烘，使其含水率达到施工要求。 5, for wet ground, the water content can meet the construction requirements through water absorption, drying, sun and lamp illumination, and hot air blower drying. |
| 上一页 环氧砂浆地坪漆施工地面要求 |
| 下一页 环氧砂浆地坪应用领域 |
Copyright © 技术支持：遨游网络