| 环氧地坪环氧面涂层 |
| 添加时间：2020/7/16 16:26:40 浏览次数： |
| 环氧地坪环氧面涂层 Epoxy floor coating 1、施工前需保持干净，如有杂物粘附需清除； 1. Before construction, it should be kept clean, and if there is any adhesion, it should be removed; 2、将面涂材料的B组份先搅拌均匀；再加入固化剂混合，充分搅拌； 2. First, mix component B of the surface coating material evenly, then add curing agent to mix and fully stir; 3、使用辊筒将材料均匀涂布； 3. The material is evenly coated with a roller; 4、第一遍涂层干固后，再施工第二次面涂层。 4. After the first coat is dry, the second coat shall be applied. 5、自流平面涂用镘刀刮镘一遍 5. The self flowing surface coating shall be troweled with a trowel 6、注意先后施工交接处的处理；涂层要求均匀，无流挂。 6. Attention should be paid to the treatment of the joint of construction successively; the coating should be uniform without sagging. |
| 上一页 环氧砂浆地坪基面要求 |
| 下一页 环氧树脂 |
Copyright © 技术支持：遨游网络