| 地面裂纹处理，用角磨机切割V字型沟槽 |
| 添加时间：2019/11/1 13:50:41 浏览次数： |
| 六道工艺：基面清理；涂刷渗透底漆一道；涂刷封闭底漆第二道；环氧砂浆第一道；打磨清理；环氧砂浆腻子修补层一道；打磨清理；刮涂环氧面漆第一道；涂刷环氧面漆第二道。 Six processes: base surface cleaning; one coat of penetrating primer; the second coat of sealing primer; the first coat of epoxy mortar; grinding and cleaning; one coat of epoxy mortar putty repair layer; grinding and cleaning; scraping and coating the first coat of epoxy finish; painting the second coat of epoxy finish. 基面处理专用打磨机打磨处理，对于重点比较差的地面，着重处理打磨掉混凝土表皮灰浆层，地面裂纹处理，用角磨机切割V字型沟槽，并清理干净里面灰尘,有机油有其他污染之基面,必须用化学方法处理干净,同时把裂缝及小坑小洞用环氧砂浆修补平整。潮湿的地方，必须烘干处理。 For the ground with poor emphasis, the mortar layer on the concrete surface shall be removed. The ground crack shall be treated. The V-shaped groove shall be cut with an angle grinder, and the dust inside shall be cleaned. For the ground with oil and other pollution, the chemical method shall be used to clean it. At the same time, the cracks and small holes shall be repaired and leveled with epoxy mortar. Wet places must be dried. |
| 上一页 环氧地板选择方法大全环氧地板选择点 |
| 下一页 什么是地面找平 |
Copyright © 技术支持：遨游网络