| 环氧砂浆地坪厚度决定地面承重能力 |
| 添加时间：2018/9/3 15:48:31 浏览次数： |
| 环氧砂浆地坪适用于各类建筑物内部的混凝土表面，机械制造厂房、重载仓库、电器、电子、通讯设备、仪器仪表、食品、医药、化工、烟草、塑料、文体用品制造车间地面、停车场车道、叉车和重车推车的走道。砂浆地坪无缝防尘、装饰效果好，耐磨、耐冲击、易于清洁耐一般的化学腐蚀寿命持久、适合重载区可做防滑地面，哑光或高光。厚度：1-3mm。 Epoxy mortar floor is suitable for the concrete surface of various buildings, machinery workshop, heavy-duty warehouse, electrical appliances, electronics, communication equipment, instruments, food, medicine, chemical industry, tobacco, plastics, stationery workshop floor, parking lot lane, forklift and trolley walkway. Mortar floor seamless dust-proof, decorative effect is good, wear-resistant, impact-resistant, easy to clean and resist general chemical corrosion life is long, suitable for heavy-duty areas can be used as anti-skid ground, matte or high gloss. Thickness: 1-3mm. 环氧砂浆地坪的承重能力取决于环氧砂浆地坪的厚度，任何一种环氧树脂地坪都是由三个部分组成的，底漆，中涂以及面漆。而每一层的厚度都会根据实际地面的好坏情况来做专门的设置， 环氧砂浆地坪漆施工的越厚，它的承重能力也就会越强，所以决定环氧砂浆地坪该施工多厚，那真是要根据你场地的实际情况来决定，不然做的太薄容易损坏，也不要因为做的太厚而造成不很必要的浪费。 The load-bearing capacity of the epoxy mortar floor depends on the thickness of the epoxy mortar floor. Any epoxy resin floor consists of three parts: primer, intermediate coat and topcoat. And the thickness of each layer will be based on the actual ground conditions to do special settings, the thicker the epoxy mortar floor paint construction, its bearing capacity will be stronger, so determine how thick the epoxy mortar floor should be constructed, it really depends on the actual situation of your site to decide, or do too thin easy to damage, but also Don't make unnecessary waste because it is too thick. |
| 上一页 环氧砂浆地坪的优点 |
| 下一页 环氧砂浆地坪基面要求 |
Copyright © 技术支持：遨游网络