环氧地板选择方法大全环氧地板选择点
Selection method of epoxy floor
第1点：基面条件
Point 1: base conditions
1。 基层强度：一般要求抗压强度≥20Mpa
1. Base strength: generally required compressive strength ≥ 20MPa
2。 平整度：你需要用环氧砂浆修复吗？
2. Flatness: do you need to repair it with epoxy mortar?
3。 在地面施工之前通常需要自动调平
3. Automatic leveling is usually required before ground construction
第2点：美学要求
Point 2: aesthetic requirements
1.颜色要求：您是否需要颜色分区？
1. Color requirements: do you need color partition?
2。 亮度要求：是哑光还是亮光？
2. Brightness requirements: matte or bright?
3。 平整度要求：是否需要平整度
3. Flatness requirements: flatness required or not
第3点：机械性能要求主要有以下三个方面：
Point 3: mechanical performance requirements mainly include the following three aspects:
1。 耐磨性：在使用地板时哪些车辆会行走;
1. Wear resistance: which vehicles will walk when using the floor;
2。 耐压性：使用时地板承受多少负荷;
2. Pressure resistance: how much load the floor bears when using;
3。 抗冲击性：冲击是否会导致地板表面剥落;
3. Impact resistance: whether the impact will cause the floor surface to peel off;
要点4：化学性能要求主要考虑以下两个方面：
Key point 4: the following two aspects are mainly considered in the chemical performance requirements:
1。 耐酸碱性：使用的腐蚀性化学品的类型和浓度。
1. Acid and alkali resistance: type and concentration of corrosive chemicals used.
2。 耐溶剂性：使用时的溶剂类型和接触时间。
2. Solvent resistance: type of solvent used and contact time.
第5点：楼层位置状态根据地下室或地下楼层的位置，您是否需要防潮或选择特殊的防潮地板？
Point 5: according to the location of basement or basement, do you need to moistureproof or select a special moistureproof floor?
第6点：安全要求如果地板处于油脂环境或坡道上，则需要选择防滑地板; 如果您在加油站或油库等特殊场所，则需要选择防静电和防爆。
Point 6: Safety requirements: if the floor is in grease environment or on the ramp, anti-skid floor shall be selected; if you are in special places such as gas station or oil depot, anti-static and explosion-proof floor shall be selected.