1、施工底涂,涂装应该均匀,无漏涂和堆除,在底涂未干之前,均匀撒布少量骨料。
1. Construction primer, painting should be uniform, no leakage coating and stacking, before the primer is dry, evenly spread a small amount of aggregate.
2、施工环氧树脂砂浆、适宜适宜摊铺机将环氧树脂砂浆铺至设计厚度,并应用抹光机压实平整,局部四陷处可采用树脂浆进行找平修补。
2. Construction of epoxy mortar, suitable paver will be epoxy mortar to the design thickness, and the use of polisher compaction level, local four pits can be leveled with resin mortar repair.
3、施工环氧树脂灌封材料,应将灌封材料倒在砂浆层上,批刮使材料渗透,直至砂浆层吸收饱满，再清除表面多余的灌封材料,宜养护12小时再进行下一道工序施工。
3. In the construction of epoxy resin filling materials, the filling materials should be poured on the mortar layer, scraped in batches to permeate the material until the mortar layer is fully absorbed, and then the surface of the excess filling materials should be removed. It is appropriate to maintain for 12 hours before the next process of construction.
4、施工面涂，采用薄涂、厚涂和自流平系统的工艺施工。
4. The construction surface is coated with thin coating, thick coating and self-leveling system.
5、施工完成后的地面,应按产品说明书的要求进行养护,养护完成后方可使用。
5. The ground after construction shall be maintained according to the requirements of the product manual, and can be used only after maintenance.
6施工完成后的地面,应该做好成品保护。
The ground after completion of construction should be well protected by finished products.